Combustible Gas Leak Detector
SENSIT® HXG-3P is an advanced, state-of-the-art, portable combustible gas leak detector capable of detecting and monitoring many combustible gases such as methane, propane, natural gas and VOCs.
SENSIT® HXG-3P is equipped with an internal pump for faster sampling and detection. The backlit LCD display monitors percent lower explosive limit ( LEL) and part-per million ( ppm) readings simultaneously for accurate gas leak detection and analysis. Audible and visual alarms warn of potential hazardous conditions.
The backlit LCD display shows percent lower explosive limit ( LEL) and part-per million ( ppm) readings simultaneously for accurate leak detection and analysis. Audible and visual alarms warn of potential hazardous conditions.
Pinpoint Gas Leaks
Gas leaks can easily be detected and located by using an audible tick rate. The sensor is located at the end of a flexible gooseneck to easily reach areas where gas leaks may be suspected.
A Data Save feature allows you to save data during any gas leak investigation.
Regulatory Compliance Applications:
EPA Method 21
Determination of Volatile Organic Compound Leaks ( VOC)
HXG-3P Standard Features
• Internal Pump
• Water/ Dust Filter
• Displays LEL and PPM
• Infrared Downloading
• Long-life, Low-Cost Sensor
• Simple Calibration
TYPE RESOLUTION RANGE ACCURACY
PPM* 1 or 10ppm 0-50, 000 ppm N/ A
LEL 0.1% 0-100% LEL ± 10%
Size: 11.5” x 3” x 2.2” ( 29.21 x 7.62 x 5.89 cm)
Weight: 1.2 lb. ( 0.54 kg)
Operational Temp: -20 to 120 F ( -28.9 to 48.9° C)
Battery Life: Alkaline: Approximately 30 hrs. Continuous